NMD Nexus Medodent Bearing for Kavo
450
Details
Description:-
1.It is best that the interference fit between bearing bore and turbine shaft is under 0.5um~1.5um. When putting burbine shaft into bearing bore,the pressure should be forced on the face of inner ring to avoide the damage of rollway and balls.
2.After fitting the bearing into tubine shaft they should be clear and instilled special lubricant.(Ethanol must not be used ).
3.After high steam sterilized the Dental High Speed Handpiece should be jetted some lubricant into the air inlet before used and so that bearing could be used longer time.
4.To keep operating stability,the proload spring stress of bearing should be controlled under 1.2±0.2N。
Reviews